The AX9 segment impresses with its precise, three-dimensional symmetry of the diamond arrangement in the substrate. This causes a continuous wear of the segment and optimises the tool life and cutting speed.
/ Suitable for brazing
/ Extremely high-cutting speed
/ Set diamond (pattern technology)
/ High-quality diamonds and best substrate material
/ Even diamond distribution in the segment
/ WET
The AX7 drilling segment with a segment height of 10 mm is also ideal for wet drilling in natural stone (granite), concrete with very hard aggregates and/or with very strong reinforcement.
| Diameter mm | LxWxH mm Segments | Part no. |
| 48-52 | 24 x 3,5 x 10 | 3AX7-050 |
| 56-66 | 24 x 3,5 x 10 | 3AX7-066 |
| 72-87 | 24 x 3,5 x 10 | 3AX7-080 |
| 87-112 | 24 x 3,5 x 10 | 3AX7-087 |
| 107-142 | 24 x 4,0 x 10 | 3AX7-112 |
| 142-182 | 24 x 4,0 x 10 | 3AX7-152 |
| 182-270 | 24 x 4,0 x 10 | 3AX7-200 |
| 270+ | 24 x 5,0 x 10 | 3AX7-300 |
| 500+ | 24 x 5,0 x 10 | 3AX7-500 |
/ DRY
The AX9 drilling segment with a segment height of 10 mm is ideal for dry drilling in masonry, brick and reinforced concrete. Less segments are required for dry drilling than for conventional wet drilling.
| Diameter mm | LxWxH mm Segments | Part no. |
| 32-37 | 16 x 3,5 x 10 | 3AX9-035 |
| 38-47 | 16 x 3,5 x 10 | 3AX9-040 |
| 48-52 | 24 x 3,5 x 10 | 3AX9-050 |
| 56-66 | 24 x 3,5 x 10 | 3AX9-066 |
| 72-87 | 24 x 3,5 x 10 | 3AX9-080 |
| 87-112 | 24 x 3,5 x 10 | 3AX9-087 |
| 107-142 | 24 x 4,0 x 10 | 3AX9-112 |
| 142-182 | 24 x 4,0 x 10 | 3AX9-152 |
| 182-270 | 24 x 4,0 x 10 | 3AX9-200 |
| 270+ | 24 x 5,0 x 10 | 3AX9-300 |
/ Special dimensions are available on request
dry
wet
set diamonds
