Developed for the harshest and most demanding applications with a cutting depth of up to 900 mm, the wall saw WM90 is suitable for carrying out large cutting jobs.
The pioneering drive concept enables a combination of extreme reliability and optimum performance with low maintenance required and reduced service costs. The easy to operate, precise remote control increases the operating comfort and safety at the workplace.
/ Innovative wall saw solution with new servo system
/ More torque and less weight
/ Rugged and compact design
/ Due to the low number of components and because they are well accessible, it is very easy to maintain
/ 3x quicker than traditional hydraulic systems
/ Flexible possibilities for use
/ Easy handling
/ Service interval of the drive unit required after 250 operating hours
/ Optionally available with radio remote control
/ Complete system solution with drive and sawing unit
WM50 for cuts up to a depth of 500 mm
WM90 for cuts up to a depth of 900 mm
(recommended with drive 6SEZB05)
| / SPECIFICATIONS | WM50 | WM90 |
| Output power at the saw blade | 20 kW | 20 kW |
| Max. speed at the saw blade | 1,140 rpm | 1,140 rpm |
| Max. Saw blade diameter | 1,200 mm | 2,000 mm |
| Max. cutting depth | 500 mm | 900 mm |
| Velocity - feed lowering | 0 - 1 m/min | 0 - 1 m/min |
| Velocity - longitudinal feed | 0 - 4 m/min | 0 - 4 m/min |
| Weight wall saw motor | 21 kg | 21 kg |
| Weight saw head without motor | 27 kg | 36 kg |
| Saw blade bore | 50 mm - other on request | 50 mm - other on request |
| Saw blade flange for flush cut | TK 110 - 6xM8 | TK 110 - 6xM8 |
| Machine depth | 380 mm | 380 mm |
| Machine width | 450 mm | 470 mm |
| Machine height (without blade guard) | 650 mm | 760 mm |
WM50 Saw head
/ Easy technology and very rugged design
/ Feed and insertion motor with 24 V technology
/ Well protected plug for feed cable
WM50 head with motor
/ Quick motor installation with bayonet connector
/ One water circuit for motor cooling and saw blade
Roller guide
/ Rail interlock with two hand levers
/ Very rugged base plate
/ Lubrication of friction bearings via grease nipples
Flange and main bearing
/ Main bearing easily accessible from the blade flange
/ Stable blade guard holder
WM90 Saw head
/ Technology and design like WM50
/ With reinforced base plate for high loads
WM90 Saw head
/ Main bearing easily accessible from the blade flange
/ Stable blade guard holder
WM90 Saw head with motor
/ Usable for wall saw blades with Ø 2000 mm
WM90 Saw head with PowerGear drive
/ Specifically suitable for wall saw blades bigger than Ø 1,200 mm
/ 60% more torque
Guide rail WM50 / WM90
/ Very lightweight and rugged design
/ Optimum use on even surfaces
/ If required, adapt uneven surfaces with spacers or the rail fastening bracket
/ Quick and easy fastening in masonry in front of insulating plates
| / SPECIFICATIONS | 1-WA-ZB030 | 1-WA-ZB065 | 1-WA-ZB130 | 1-WA-ZB230 |
| Length | 0,30 m | 0,65 m | 1,30 m | 2,30 m |
| Weight | 2,5 kg | 5,5 kg | 11,0 kg | 19,0 kg |
| Spare parts for Guide rail type | Toothed rack | Guide bar 1 | Guide bar 2 |
|---|---|---|---|
| 0,30 m | 2WASCHZUB0300 | 2WASCHZUB0302 | 2WASCHZUB2301 |
| 0,65 m | 2WASCHZUB0652 | 2WASCHZUB0651 | 2WASCHZUB0650 |
| 1,30 m | 2WASCHZUB1302 | 2WASCHZUB1301 | 2WASCHZUB1300 |
| 2,30 m | 2WASCHZUB2302 | 2WASCHZUB2301 | 2WASCHZUB2300 |
Accessories
Fish plate
Part no. 1-WA-ZB011
Guide rail stop
Part no. 1-WA-ZB01
Rail fastening bracket
Part no. 1-WA-ZB10
Angle bracket
Part no. 1-WA-ZB02
Fish plate
Part no. 1-WA-ZB012
/ Refer other products for concrete screws, washers, drop-in anchors & more accessories
PowerGear for WM90
Part no. 6SEZB05
Recommended for difficult applications with blade diameters exceeding 1,200 mm, when using the PowerGear, increase of the torque by 60%
/ Reduction ratio 1.6:1
/ Specifically suitable for wall saw blades bigger than 1,200 mm
/ Max. 712 rpm at the blade drive shaft
/ High-quality, milled aluminium housing
/ Extremely rugged
/ Very low in maintenance
/ Depth of the entire drive unit is increased by 12.5 cm
/ Increase of the torque by 60%
/ Attention: only in use with WM90
| / SPECIFICATIONS | |
| Weight | 10.0 kg |
| Dimensions W x D x H | 22 cm x 20 cm x 19 cm |
| Reduction ratio | 1,6 : 1 |
| Diameter saw blade mm | Display | Blade speed = 43 m/s |
|---|---|---|
| 1,200 | 1,140 rpm | 684 rpm |
| 1,400 | 977 rpm | 587 rpm |
| 1,500 | 912 rpm | 548 rpm |
| 1,600 | 856 rpm | 514 rpm |
| 1,800 | 761 rpm | 457 rpm |
| 2,000 | 683 rpm | 410 rpm |
Wall saw machine WM50 or WM90
/ Rugged and compact design
/ Easy handling
Part no.
Typ WM50 – 1-WM50EVA-EB
Typ WM90 – 1-WM90EVA-EB
Drive motor ServoEngine
/ Powerful 20 kW motor
/ High torque with low weight
/ Long life service interval after 250 operating hours
Part no.
6SE20
Control unit PowerCube
/ Air-cooled control box
/ Simple and user-friendly menu navigation with touch screen
Part no.
6SEPC20
Motor cable ServoCable
/ Cable length 10 m
/ Very solid design
/ Weight only 7.8 kg
/ Incl. strain relief and protection cap
Part no.
6SC20
Cable remote control ServoControl
/ Simultaneous control of feed and swivelling possible
/ Cable length 10 m
/ Incl. Abdominal belt
Part no.
6SEZB01
Feed cable
/ Cable length 10 m
/ Very solid design
Part no.
1-HA-ZB10
Blade guard
/ Light-weight and very stable
/ 3-part with quick release fastener
Part no.
Blade guard diameter 800 mm – 1-WA-ZB0800
Blade guard diameter 1.000 mm – 1-WA-ZB1000
Blade guard diameter 1.200 mm – 1-WA-ZB1200
Blade guard diameter 1.500 mm – 1-WA-ZB1500
Blade guard diameter 2.000 mm – 1-WA-ZB2000
Blade guard, flush
/ Light-weight despite high stiffness
/ 1-part version
Part no.
Blade guard diameter 800 mm – 1-WA-ZB0800B
Blade guard diameter 1.000 mm – 1-WA-ZB1000B
Blade guard diameter 1.200 mm – 1-WA-ZB1200B
Blade guard diameter 1.500 mm – 1-WA-ZB1500B
Guide rail
/ Lightweight and rugged design
Part no.
Length 0,3 m – 1-WA-ZB030
Length 0,65 m – 1-WA-ZB065
Length 1,3 m – 1-WA-ZB130
Length 2,3 m – 1-WA-ZB230
Fish plate for guide rail
/ At least two pieces per rail fastener required
/ For the 2.3 m rail, the use of three is recommended
/ Scope of delivery 1 pcs.
Part no.
1-WA-ZB011
Fish plate for guide rail
/ For a quick installation
/ Produced from high-strength material
Part no.
1-WA-ZB012
Rail fastening bracket
/ Lateral adjustment
/ Alternatively possible for very uneven walls
Part no.
1-WA-ZB10
Bevel adjustment support
/ Continuous adjustment form 0° to 45°
Part no.
1-WA-ZB12
Guide rail stop
/ Scope of delivery 2 pcs
/ To be used on each end of the rail
/ Prevents running over the rail end
Part no.
1-WA-ZB01
Radio remote control ServoControl
/ Simultaneous control of feed and swivelling possible
/ Incl. abdominal belt and 2 batteries
Part no.
6SEZB04
PowerGear for WM90
/ Increase of the torque by 60%
/ Suitable for saw blade diameters up to 2,000 mm
Part no.
6SEZB05
Water distribution screw
/ To be used for flush cut
Part no.
Typ WM50 – 1-WM50ZB01
Typ WM90 – 1-WM90ZB01
Flush screw M8 x 16
/ Scope of delivery 1 pc
/ To be used for flush cut
Part no.
2NTS7991M8x16VZ10.9
Upgrade kit WM50 / WM90
Part no. 6SEPC-ACC
Feed automatic WM50/WM90
/ Controls feed and lowering speed automatically
/ The upgrade kit is compatible with all sorts of remote controls
/ Including touch emergency operation for feed and lowering
EURODIMA ACC Feed automatic
Feed automatic
Service-Kits for WM50 / WM90
| Machine type | Component | Part no. |
|---|---|---|
| WM50 | Main bearing set | 2WSBG0001WM50 |
| WM50 | Guide roller set | 2WSBG0002WM50 |
| WM90 | Main bearing set | 2WSBG0001WM90 |
| WM90 | Guide roller set | 2WSBG0002WM90 |
| WM50 / WM90 | Repair kit lowering drive | 2WSBGAB001 |
| WM50 / WM90 | Repair kit feed drive | 2WSBGVS001 |
| WM50 / WM90 | Drive motor service kit 250 hours | 6SESK1 |