/ Laser welded
/ For cutting general construction site material, abrasive materials, old concrete, asphalt, concrete, roof tiles, screed, fresh concrete, granite, sand-lime brick, natural & artificial stone, reinforced concrete, exposed aggregate concrete and brick
| Blade diameter mm | Hole diameter + NL* mm | Segment Number | Segment width mm | Segment high mm | Part no. |
| 115 | 22,23 | 9 | 2,2 | 10 | 3SPL20-0115-2 |
| 125 | 22,23 | 10 | 2,2 | 10 | 3SPL20-0125-2 |
| 230 | 22,23 | 15 | 2,6 | 10 | 3SPL20-0230-2 |
| 300 | 25,40 + NL | 20 | 3,0 | 10 | 3SPL20-0300-3 |
| 350 | 20,00 + NL | 23 | 3,0 | 11 | 3SPL20-0350-1 |
| 350 | 25,40 + NL | 23 | 3,0 | 10 | 3SPL20-0350-3 |
| 400 | 20,00 + NL | 26 | 3,2 | 11 | 3SPL20-0400-1 |
| 400 | 25,40 + NL | 26 | 3,2 | 10 | 3SPL20-0400-3 |
| 450 | 25,40 + NL | 30 | 3,2 | 10 | 3SPL20-0450-3 |
/ Intermediate and special sizes as well as special holes available on request
/ *NL =pin hole
/ The segment foot height can vary between 1 – 2 mm
dry
wet
Angle grinder
Manual / patrol cut-off saw
Floor cutter (7.5 kW – 11 kW)
Table saw