Diamond joint cutting disc
/ Wide cut cutting disc to ream joints
/ Suitable for abrasive construction materials such as screed, plaster, sandstone and masonry
/ Available in segment widths from 4.5-10.0 mm
/ Available from Ø 102–230 mm
dry
Manual / patrol cut-off saw
Diamond reamer
Part no. – on request
/ Chamfering disc/chamfer milling cutter for 45° bevel
/ Suitable for old concrete, concrete, masonry and brick
/ Available from Ø 100–230 mm
dry
wet
Manual / patrol cut-off saw
Chamfering disc-chamfer milling cutter
Part no. – on request
/ For 22.5° bevels
/ Suitable for asphalt and abrasive materials such as screed, plaster and sandstone
/ Available from Ø 102–230 mm
dry
wet
Manual / patrol cut-off saw
Chamfering disc-chamfer milling cutter
Part no. – on request
/ For 45° bevels
/ Bevel width possible up to 18 mm
/ Suitable for old concrete and concrete
/ Guide possible with additional cutting disc
/ Available in Ø 280 mm
/ Scope of delivery: 1 pc.
wet
Floor cutter (7.5 kW – 11 kW)
Chamfering disc-chamfer milling cutter
Part no. – on request
/ For 45° bevel
/ Bevel width possible up to 18 mm
/ Suitable for asphalt and abrasive materials such as screed and fresh concrete
/ Guide possible with additional cutting disc
/ Available in Ø 280 mm
/ Scope of delivery: 1 pc.
wet
Floor cutter (7.5 kW – 11 kW)
Chamfering disc-chamfer milling cutter
Part no. – on request
/ Suitable for old concrete and concrete
/ Available in Ø 150 mm
/ Laser welded
dry
Floor cutter (7.5 kW – 11 kW)
Chamfering disc-chamfer milling cutter
Part no. – on request
/ Suitable for asphalt and abrasive materials such as screed and fresh concrete
/ Available in Ø 150 mm
/ Laser welded
dry
Floor cutter (7.5 kW – 11 kW)
Joint brush
Part no. – on request
/ To clear out joints
/ Available in brush widths 8.0 and 10.0 mm
/ Available in diameter Ø 300 mm
dry
Floor cutter (7.5 kW – 11 kW)
Combi milling cutter
Part no. – on request
/ Chamfering disc/combi milling cutter
/ Suitable for cutting plastic pipes
/ Available from Ø 115-350 mm
dry
wet
Angle grinder
Rescue
Part no. – on request
/ Cutting disc for universal use
/ Suitable for cutting sheet metal, GRP, rubber, plastics, safety glass, concrete
/ Available from Ø 115-400 mm
dry
wet
Angle grinder
Manual / patrol cut-off saw
Grooving cutter – joint cutter
Part no. – on request
/ Wide-cut cutting disc to cut grooves or clear joints
/ Suitable for asphalt and other abrasive materials
/ Available in segment widths from 5.0–20.0 mm
/ Available from Ø 300–600 mm
wet
Floor cutter (7.5 kW – 11 kW)
Cup wheels
Part no. – on request
/ With different segment layouts
/ To grind surfaces
/ Available for all materials such as asphalt, abrasive construction materials, concrete, masonry, etc.
/ Available from Ø 125–150 mm
dry
Angle grinder
Tiles drill bit
Part no. – on request
/ Connection M14 for angle grinders
/ Electroplated coating
/ Available in different working lengths
/ Suitable for drilling fine stone, tiles, natural stone, GRP
/ Available from Ø 5–150 mm
dry
wet
Angle grinder
Drilling drill bits
Part no. – on request
/ To drill holes with excessive length
/ Consisting of a head end, one or several extending pipes and the drill bit
/ Locking possible with C-pliers
/ Number of extending elements selectable
/ Drill head cooling with water, air or spray mist possible
/ Available with or without core catch spring
dry
wet
rig-guided
Diamond teeth for channel milling cutter
Part no. – on request
/ For use on channel milling cutters
/ Suitable for concrete (all hardnesses), injection and limestone
/ Available in different dimensions
wet